Agilent 16522A Pattern Generator (service) by PDF

Read Online or Download Agilent 16522A Pattern Generator (service) PDF

Similar nonfiction_6 books

New PDF release: Handbook for Evaluating Infrastructure Regulatory Systems

"The authors introduce a technique that would aid coverage makers enhance the criminal and institutional framework in their regulatory regime and support regulators to enhance the standard in their judgements" - Jerson Kelman basic Director of ANEEL Brazilian electrical energy Regulatory service provider "Just this kind of toolkit bankers have to comprehend the regulatory dangers in nations the place they're first-time creditors to the field.

Read e-book online Three Copernican treatises : the Commentariolus of PDF

Translated with advent, Notes and Bibliography by means of Edward Rosen

Additional info for Agilent 16522A Pattern Generator (service)

Sample text

2 Remove four screws attaching the ground spring and rear panel to the circuit board, then remove the back panel and ground spring. 3 Replace the faulty circuit board with a new circuit board. On the circuit board, make sure the 20-pin ribbon cable is connected between J7 and J8. 4 Position the ground spring and back panel on the back edge of the replacement circuit board. Install four screws to connect the back panel and ground spring to the circuit board. ” To install the cables 1 Plug the five data cables and the clock cable in the appropriate connectors on the circuit board.

During the warranty period, Agilent Technologies will, at its option, either repair or replace products that prove to be defective. For warranty service or repair, this product must be returned to a service facility designated by Agilent Technologies. For products returned to Agilent Technologies for warranty service, the Buyer shall prepay shipping charges to Agilent Technologies and Agilent Technologies shall pay shipping charges to return the product to the Buyer. However, the Buyer shall pay all shipping charges, duties, and taxes for products returned to Agilent Technologies from another country.

2 Position the cables on the rear panel so the cable clamp can be properly installed on the rear panel. 3 Install three screws that secure the cable clamp onto the rear panel. 4 Install the 16522A module into the mainframe. To replace the module 1 If the module consists of one card, go to step 2. If the module consists of more than one card, connect the cables together in a master/ expander configuration. Follow the procedure “To configure a multi-card module” in chapter 2. 2 Slide the cards above the slots for the module about halfway out of the mainframe.

Download PDF sample

Agilent 16522A Pattern Generator (service)


by Paul
4.0

Rated 4.99 of 5 – based on 38 votes